Beskrivelse
Instructions for use:
Plastic container contains pre-treatment, and aluminum tube contains adhesive. Apply a thin layer of pre-treatment first to the surfaces you are going to glue and let it dry for a couple of minutes. When the surfaces are dry, you can apply adhesive. You can now press the surfaces together. Feel free to use a hairdryer for best results.
pre-treatment and glue shall not mixed together, but applied to the surfaces separately.
How to glue on: 1) Inflate the packraft and figure out where you want to place the item you're going to glue. Press on and mark with a pen. 2) Apply hardener to both surfaces to be bonded (let it dry for a couple of minutes) and glue to both surfaces to be bonded. 3) Iron and press for 2-3 minutes, preferably with a hairdryer. Ensure there are no air pockets, folds, or wrinkles. This should create a permanent bond.
